Jig mold inventory

Steve-O · Posted: Sat, Jan 27 2007 02:50 pm Post subject: Jig mold inventory

I have the following jig molds

1/16 x 4, 1/8 x4 collarless ball head do it mold
1/16 x 8 pony head road runner do it mold
1/4 through 1/64 collarless do it jig mold

I'm looking for someone with a 3/8, 1/4, 5/8 jig mold. I need pour a few bigger jigs. You are welcome to use mine.

While we are at it, why not list your molds so we know who has what and we can swap molds or have some pouring parties.

I also have a melting pot and a lot of lead.
_________________
You think THAT'S hard, try naming two cities in New Hampshire!

texascrappiefisherman · Posted: Sat, Jan 27 2007 07:20 pm Post subject:

I just won 3 molds on ebay. I think that one or two of them are larger heads.

I have:

1/16 - 1/32 x 4 each roundhead w/barb DO IT
1/8 - 1/4 x 4 each roundhead w/barb DO IT
1/16 - 1/32 x 4 each crappie jig no barb DO IT

20 lb Lee melt pot

LOTS of lead.

I like the Barlow's on Saturday idea we could pour heads there also.
_________________
Jerry Hamon
TPWD Angler Instructor
Van Alstyne, TX

Wylie Crappieman · Posted: Sat, Jan 27 2007 07:27 pm Post subject:

I have a 1/16-1/8 Do it,

And 2 I'd like to trade..

I have a 1/32 X8 Round head Do IT

And a 1/16 X 8 with BArb

I'd like to have a 1/16 x 8 for one of them and a 1/8 x8 for the other.

Maybe Barlows would make a trade in
_________________
Lord, can I go fishin?

After you do your chores son.

Yessir..Thank you!

Steve-O · Posted: Mon, Feb 05 2007 08:14 pm Post subject:

texascrappiefisherman wrote:

I just won 3 molds on ebay. I think that one or two of them are larger heads.
I have:
1/16 - 1/32 x 4 each roundhead w/barb DO IT
1/8 - 1/4 x 4 each roundhead w/barb DO IT
1/16 - 1/32 x 4 each crappie jig no barb DO IT

Let us know what three you got on ebay.

I'd like to pour a few with the 2d mold. I'll have to trim the barb off, but no biggy. Let me know when you can get together. I'm in Richardson near coit and campbell. I can do it on a weekday during the day if I know ahead of time.
_________________
You think THAT'S hard, try naming two cities in New Hampshire!

R&BCustomTackle · Posted: Fri, Feb 09 2007 05:02 am Post subject:

Well i guess this would be a good first post to the board so here goes a list of some of my molds.

Banana Head 1/8-1/2
Horse Head Jig 1/32 x4, 1/16x4
Horse Head Jig 1/48-1/4
Vibrating blade lure 1/4-3/4
Tail Spinner 3/8-3/4
Ultra Minnow 1/8-5/8
Casting Spoon 1/4-1oz
Casting Spoon 1 1/2- 3oz
Round head Pro no collar 1/64 x8
Round Head Pro no collar 1/48 x8
Round Head Production no collar 1/32x8 weedless and non weedless
Round Head Production no collar 1/16x8 weedless and non weedless
Round head no collar 1/8x8 weedless and non weedless
Round head no collar 1/4x8 weedless and non weedless
(custom) 1/8-3oz Sand Shad spinner( front or rear spinner)
(custom) 1/8-3oz Minnow Shad spinner(front or rear spinner)
(custom)round head with eyes no collar 1/32-1/2 weedless or non weedless
50 lb rcbs casting unit 400lbs of lead
Although I am a tackle and rod builder i would love to assist anyone on here with the use of molds or i could even cast for ya if ya have the hooks or inserts, have tons og jig tying supplies and enough extra vices for 6 people so next time you have a jig tying get together i would love to assist and teach some people what i know.
BTW my name is Bryon and i am in the wylie area.

Steve-O · Posted: Fri, Feb 09 2007 10:05 am Post subject:

Let's have a pouring party. You guys like weekday nights or weekends?

Bryon, you have a couple molds I am interested in. The larger jig molds.

I want to get davidp there to show me how he paints his.
_________________
You think THAT'S hard, try naming two cities in New Hampshire!

Steve-O · Posted: Fri, Feb 09 2007 10:05 am Post subject:

Let's have a pouring party. You guys like weekday nights or weekends?

Bryon, you have a couple molds I am interested in. The larger jig molds.

I want to get davidp there to show me how he paints his.
_________________
You think THAT'S hard, try naming two cities in New Hampshire!

Wylie Crappieman · Posted: Fri, Feb 09 2007 11:48 am Post subject:

R&BCustomTackle wrote:

Well i guess this would be a good first post to the board so here goes a list of some of my molds.

Banana Head 1/8-1/2
Horse Head Jig 1/32 x4, 1/16x4
Horse Head Jig 1/48-1/4
Vibrating blade lure 1/4-3/4
Tail Spinner 3/8-3/4
Ultra Minnow 1/8-5/8
Casting Spoon 1/4-1oz
Casting Spoon 1 1/2- 3oz
Round head Pro no collar 1/64 x8
Round Head Pro no collar 1/48 x8
Round Head Production no collar 1/32x8 weedless and non weedless
Round Head Production no collar 1/16x8 weedless and non weedless
Round head no collar 1/8x8 weedless and non weedless
Round head no collar 1/4x8 weedless and non weedless
(custom) 1/8-3oz Sand Shad spinner( front or rear spinner)
(custom) 1/8-3oz Minnow Shad spinner(front or rear spinner)
(custom)round head with eyes no collar 1/32-1/2 weedless or non weedless
50 lb rcbs casting unit 400lbs of lead
Although I am a tackle and rod builder i would love to assist anyone on here with the use of molds or i could even cast for ya if ya have the hooks or inserts, have tons og jig tying supplies and enough extra vices for 6 people so next time you have a jig tying get together i would love to assist and teach some people what i know.
BTW my name is Bryon and i am in the wylie area.

We need to get together. Sit around and tie a jig or 3 and drank some coffee.
_________________
Lord, can I go fishin?

After you do your chores son.

Yessir..Thank you!

texascrappiefisherman · Posted: Fri, Feb 09 2007 05:16 pm Post subject:

Steve-O wrote:

texascrappiefisherman wrote:

I just won 3 molds on ebay. I think that one or two of them are larger heads.
I have:
1/16 - 1/32 x 4 each roundhead w/barb DO IT
1/8 - 1/4 x 4 each roundhead w/barb DO IT
1/16 - 1/32 x 4 each crappie jig no barb DO IT

Let us know what three you got on ebay.

I'd like to pour a few with the 2d mold. I'll have to trim the barb off, but no biggy. Let me know when you can get together. I'm in Richardson near coit and campbell. I can do it on a weekday during the day if I know ahead of time.

The three I won are old Ament molds.
#1 - 5/8, 1/2, 3/8, 1/4 teardrop shape - no barb (straight thru hooks)
#2 - 2ea x 3 ballon shaped heads look to be up to 3/4
#3 - 2 each 1/32, 1/16, 1/8 no barb

I've got 3 or 4 more coming from ebay. When I get them I'll repost.
I'm ready to get together. When you throw in coffee I'm really ready.
I'm tied up next Tuesday evening other than that let's go.
I work in Plano (Park & Midway) so anywhere n or s of there is good.
_________________
Jerry Hamon
TPWD Angler Instructor
Van Alstyne, TX

R&BCustomTackle · Posted: Fri, Feb 09 2007 07:17 pm Post subject:

not a problem Steve-O which ones do ya want to borrow i might even have some already cast just replace the hooks i use and im good. On a lighter note and a chane of topic has anyone caught anything other than throwbacks at East Fork Marina? havent been able to really fish much of the rest of the laske since the boat is being tuned up

R&BCustomTackle · Posted: Fri, Feb 09 2007 07:21 pm Post subject:

not a problem Steve-O which ones do ya want to borrow i might even have some already cast just replace the hooks i use and im good. On a lighter note and a chane of topic has anyone caught anything other than throwbacks at East Fork Marina? havent been able to really fish much of the rest of the laske since the boat is being tuned up

Scott Sandy · Posted: Fri, Feb 09 2007 07:28 pm Post subject:

East Fork marina is still closed, but that is where you'll find me come spawn. I have a feeling it's gonna be awesome. Just look for the guy wading along the bank (actually, right up against the gas dock). I might just have to come up and met all you folks at the next get together. I need some more jigs, just don't want to make any. No coffee for me though

R&BCustomTackle · Posted: Fri, Feb 09 2007 07:37 pm Post subject:

hmmm i was at East Fork this morning and caught about ten throw backs out of my boat slip, and to my knowledge just about everyone that has a slip on the first three or four docks has been able to start putting boats in there is a little problem with the undergrowth from it being dry so long but before i put my boat in the shop today i was able to have my boat in its stall for almost a week for the first time since july

Scott Sandy · Posted: Fri, Feb 09 2007 07:44 pm Post subject:

It's just open to people with slips, not us non-members

have to wait until the new road is open. At least that's what I'm being told by the gate attendant. Should be really good pretty soon, another 2 foot and you're set. I'm really looking forward to a great spawn this year.

shawn · Posted: Fri, Feb 09 2007 08:18 pm Post subject:

I have a 1/18, 1/8, 1/4, 5/8 some one can have... never used it. Maytag AKA MikeC gave it to me years ago.

texascrappiefisherman · Posted: Fri, Feb 09 2007 11:01 pm Post subject:

shawn wrote:

I have a 1/18, 1/8, 1/4, 5/8 some one can have... never used it. Maytag AKA MikeC gave it to me years ago.

I'll take those off your hand. I'll PM
_________________
Jerry Hamon
TPWD Angler Instructor
Van Alstyne, TX

Steve-O · Posted: Sat, Feb 10 2007 08:23 am Post subject:

I have good luck in East Fork, but not this early.

I'm thinking the next year or so we might see some smaller crappie. Drought did this back in 98 also.
_________________
You think THAT'S hard, try naming two cities in New Hampshire!